1895 8th Grade Fina...
 
Share:
Notifications
Clear all

1895 8th Grade Final Exam

Page 1 / 2
(@grubb-industries)
Noble Member

8th Grade Final Exam: Salina , Kansas - 1895

This was emailed to me this morning, I found it interesting, but I did find a mistake that makes me wonder if it's real. Can you spot the error in one of the Arithmetic questions.

Grammar (Time, one hour)

1. Give nine rules for the use of capital letters

2. Name the parts of speech and define those that have no modifications.

3. Define verse, stanza and paragraph

4. What are the principal parts of a verb? Give principal parts of 'lie,''play,' and 'run'

5. Define case; illustrate each case.

6 What is punctuation? Give rules for principal marks of punctuation.

7 - 10. Write a composition of about 150 words and show therein that you understand the practical use of the rules of grammar.

Arithmetic (Time,1 hour 15 minutes)

1. Name and define the Fundamental Rules of Arithmetic.

2. A wagon box is 2 ft. Deep, 10 feet long, and 3 ft. Wide. How many bushels of wheat will it hold?

3. If a load of wheat weighs 3,942 lbs., what is it worth at 50cts/bushel, deducting 1,050 lbs. For tare?

4. District No 33 has a valuation of $35,000. What is the necessary levy to carry on a school seven months at $50 per month, and have $104 for incidentals?

5. Find the cost of 6,720 lbs. Coal at $6.00 per ton.

6. Find the interest of $512.60 for 8 months and 18 days at 7 percent.

7. What is the cost of 40 boards 12 inches wide and 16 ft.. Long at $20 per metre?

8. Find bank discount on $300 for 90 days (no grace) at 10 percent.

9. What is the cost of a square farm at $15 per acre, the distance of which is 640 rods?

10. Write a Bank Check, a Promissory Note, and a Receipt

U.S. History (Time, 45 minutes)

1 Give the epochs into which U.S. History is divided

2. Give an account of the discovery of America by Columbus

3. Relate the causes and results of the Revolutionary War.

4. Show the territorial growth of the United States

5. Tell what you can of the history of Kansas

6. Describe three of the most prominent battles of the Rebellion.

7. Who were the following: Morse, Whitney, Fulton , Bell , Lincoln , Penn, and Howe?

8. Name events connected with the following dates: 1607, 1620, 1800, 1849, 1865.

Orthography (Time, one hour) Do we even know Orthography is ??

1. What is meant by the following: alphabet, phonetic, orthography, etymology, syllabication

2.. What are elementary sounds? How classified?

3. What are the following, and give examples of each: trigraph, subvocals, diphthong, cognate letters, linguals

4. Give four substitutes for caret 'u.'

5. Give two rules for spelling words with final 'e.' Name two exceptions under each rule.

6. Give two uses of silent letters in spelling. Illustrate each.

7. Define the following prefixes and use in connection with a word: bi, dis, mis, pre, semi, post, non, inter, mono, sup.

8. Mark diacritically and divide into syllables the following, and name the sign that indicates the sound: card, ball, mercy, sir, odd, cell, rise, blood, fare, last.

9. Use the following correctly in sentences: cite, site, sight, fane, fain, feign, vane , vain, vein, raze, raise, rays.

10. Write 10 words frequently mispronounced and indicate pronunciation by use of diacritical marks

And by syllabication.

Geography (Time, one hour)

1 What is climate? Upon what does climate depend?

2. How do you account for the extremes of climate in Kansas ?

3. Of what use are rivers? Of what use is the ocean?

4. Describe the mountains of North America

5. Name and describe the following: Monrovia , Odessa , Denver , Manitoba , Hecla , Yukon , St. Helena, Juan Fernandez, Aspinwall and Orinoco

6. Name and locate the principal trade centers of the U.S. Name all the republics of Europe and give the capital of each.

8. Why is the Atlantic Coast colder than the Pacific in the same latitude?

9. Describe the process by which the water of the ocean returns to the sources of rivers.

10. Describe the movements of the earth. Give the inclination of the earth.

Notice that the exam took FIVE HOURS to complete!!

Quote
Topic starter Posted : 26/02/2011 9:00 am
(@nuker)
Prominent Member

I'LL BET NOT ONE OF THOSE TEACHERS PROTESTING ACROSS THE USA COULD ANSWER THOSE QUESTIONS. BUT THEY ALL WANT THEIR COLLECTIVE BARGAINING PROTECTED.LOLOLOLOLOLOL

NUKER

:minigun:

ReplyQuote
Posted : 26/02/2011 7:35 pm
(@draco)
Estimable Member

The only thing I can see that make it questionable is:

Long at $20 per metre?

Metric came some time after 1895 I believe.

~Johnny Jones

ReplyQuote
Posted : 26/02/2011 9:42 pm
{DOU}Cygnus
(@doucygnus)
Illustrious Member

Draco wrote: The only thing I can see that make it questionable is:

Long at $20 per metre?

Metric came some time after 1895 I believe.

~Johnny Jones

No, the metric system came out about a hundred years before.

However, I noticed that meters, not square meters were being asked for here so if it is a simple lineal conversion the width of the boards would be irrevelant. Depending on the expected answer it could be an error or just a trick question.

ReplyQuote
Posted : 27/02/2011 7:14 am
(@draco)
Estimable Member

{DOU}Cygnus wrote: [quote=Draco]The only thing I can see that make it questionable is:

Long at $20 per metre?

Metric came some time after 1895 I believe.

~Johnny Jones

No, the metric system came out about a hundred years before.

You are correct, my man. I read somewhere that the USA was trying to convert in the 70's but the fact we're stubborn little gnomes prevented it. It made me think that the metric system was much newer. hehehe.

~Johnny Jones

ReplyQuote
Posted : 27/02/2011 7:28 am
{DOU}Cygnus
(@doucygnus)
Illustrious Member

Draco wrote:

You are correct, my man. I read somewhere that the USA was trying to convert in the 70's but the fact we're stubborn little gnomes prevented it. It made me think that the metric system was much newer. hehehe.

~Johnny Jones

Yeah, I remember the push for it when I was in school. It is a much simpler system to use but you really need to be raised with it for it to be comfortable to use. Like driving on the right side of the road...lol

ReplyQuote
Posted : 27/02/2011 7:34 am
(@grasshopper)
Honorable Member

Tyr it our way "Aussie" style, that'll fuck with your head. πŸ˜†

Grasshopper. πŸ˜†

ReplyQuote
Posted : 27/02/2011 9:42 am
(@ground-zero)
Noble Member

If you can understand that 3/16 = 0.1875 then why bother to do math like 0.1875 + 0.5?

"The buddy system is essential to your survival; it gives the enemy somebody else to shoot at!!"

ReplyQuote
Posted : 27/02/2011 11:16 am
(@badmotor)
Trusted Member

All I know is that as an Engineer in the manufacturing world the metric system is way easier to understand and use. Trying to explain something to a job shop that you want to change something point one mills or hundred thou when you need a tight tolerance.

ReplyQuote
Posted : 27/02/2011 12:54 pm
(@grubb-industries)
Noble Member

Your correct, but also Metric is never used in lumber and construction , It is always in feet or yards even here in Canada where we have use the Metric system, if you go buy lumber and ask for 3 metres you better take a tape measure with you.

I guess it is not worth changing the standard 4x8 sheet of drywall or plywood it would have caused to much confusion,

ReplyQuote
Topic starter Posted : 27/02/2011 1:25 pm
(@abberation)
Noble Member

Grasshopper wrote: Tyr it our way "Aussie" style, that'll fuck with your head. πŸ˜†

Grasshopper. πŸ˜†

Drink till it makes sense?

ReplyQuote
Posted : 27/02/2011 5:29 pm
(@grubb-industries)
Noble Member

I'll drink to that

ReplyQuote
Topic starter Posted : 27/02/2011 9:09 pm
(@hotsknjasmin)
Estimable Member

Very Interesting Exam

ReplyQuote
Posted : 27/02/2011 9:12 pm
{DOU}Cygnus
(@doucygnus)
Illustrious Member

Grubb Industries wrote: Your correct, but also Metric is never used in lumber and construction , It is always in feet or yards even here in Canada where we have use the Metric system, if you go buy lumber and ask for 3 metres you better take a tape measure with you.

I guess it is not worth changing the standard 4x8 sheet of drywall or plywood it would have caused to much confusion,

Measuring limber sizes is messed up.

2x4 is actually 1-1/2x3-1/2 inches

1x10 is actually 3/4x9-1/4 inches

ReplyQuote
Posted : 28/02/2011 10:37 am
.::/3IΒ§ON::.
(@3ion)
Member Admin

{DOU}Cygnus wrote: [quote=Grubb Industries]Your correct, but also Metric is never used in lumber and construction , It is always in feet or yards even here in Canada where we have use the Metric system, if you go buy lumber and ask for 3 metres you better take a tape measure with you.

I guess it is not worth changing the standard 4x8 sheet of drywall or plywood it would have caused to much confusion,

Measuring limber sizes is messed up.

2x4 is actually 1-1/2x3-1/2 inches

1x10 is actually 3/4x9-1/4 inches

Limber sizes huh :mrgreen:

WTF were you thinking about when you wrote that πŸ˜€

ReplyQuote
Posted : 28/02/2011 1:05 pm
Page 1 / 2
Share: